| Brand | RW Energy |
| Model NO. | RWS-6800 Online intelligent motor soft starter/cabinet |
| Rated frequency | 50/60Hz |
| Series | RWS |
Description ：
RWS-6800 soft starter/cabinet adopts a new generation of soft starter technology, and adaptive control realizes the control of the motor acceleration curve and deceleration curve to an unprecedented level.The soft starter reads the data of the motor in the process of starting and stopping, and then adjusts to achieve the best effect. Just select the curve most suitable for your load type, and the soft starter will automatically ensure that the load is accelerated in the most stable way possible.
Main function introduction:
Open-phase protection
Multiple startup modes
Under-voltage and over-voltage protection
Reducing Starting Current and Mechanical Impact
Multi-Protection and Energy Efficiency Optimization
Device structure:
External connection diagram
Q:What is the difference between VFD and soft starter?
A:Function: VFD can adjust the speed, starting and braking of the motor by changing the frequency and voltage of the power supply. The soft starter is mainly used for the smooth starting of the motor to reduce the impact of the starting current, and it does not involve speed regulation.
Application scenarios: VFD is suitable for occasions where speed control is required, such as industrial production lines, air - conditioning systems, etc. The soft starter is suitable for equipment that only needs smooth starting and has no special requirements for speed, such as large - scale water pumps and air compressors.
Energy - saving effect: VFD saves energy through precise speed regulation with remarkable results. The energy - saving of the soft starter is reflected in reducing the energy consumption during starting, and the overall energy - saving level is lower than that of VFD.
Q:How does a soft start motor starter work?
A:The soft - start motor starter is based on power electronics technology and often uses a thyristor voltage - regulating circuit to work. During startup, it gradually increases the conduction angle of the thyristor according to the set curves (such as linear rise, ramp rise, constant current, etc.), so that the voltage applied to the motor gradually increases, and the motor speed rises smoothly. When the motor speed approaches the rated speed, the rated voltage is output, and the thyristor is fully conducting. In some cases, a bypass contactor is used to short - circuit the soft - starter. During shutdown, the voltage can also be decreased according to the curve, allowing the motor to decelerate smoothly.
-
Why Regular Transformer Maintenance Matters: 5 Serious Consequences of Neglecting ItI. Allowable TemperatureWhen a transformer is in operation, its windings and iron core generate copper loss and iron loss. These losses are converted into heat energy, causing the temperature of the transformer's iron core and windings to rise. If the temperature exceeds the allowable value for a long time, the insulation will gradually lose its mechanical elasticity and age.The temperature of each part of the transformer during operation is different: the winding temperature is the highest, folRockwell09/12/2025 -
How to Implement Condition-Based Maintenance for Power Transformers? A Complete 4-Step Process Analysis1. Definition of Condition-Based MaintenanceCondition-based maintenance refers to a maintenance method where decisions on whether and how to perform maintenance are determined based on the real-time operating status and health condition of equipment. It has no fixed maintenance methods or schedules. The prerequisite for condition-based maintenance is the establishment of equipment parameters and the comprehensive analysis of various operational information of the equipment, so as to make reasonaNoah09/12/2025 -
Can't choose a dry-type transformer? Get expert advice – free.Traction Rectifier TransformersRated capacity: 800 to 4400 kVA; Voltage class: 10 kV and 35 kV; Rectifier pulse number: 12-pulse and 24-pulse. Compared with 12-pulse rectifier circuits, 24-pulse rectifier circuits can reduce the harmonic pollution of the power grid by 50%, and no filtering equipment is needed at this location. It is suitable for power supply systems of urban subways and rail transit.Excitation Rectifier TransformersRated capacity: 315 to 3000 × 3 kVA; Voltage class: 10 kV, 13.8Vziman09/12/2025 -
SG10 Series Transformer Overload Protection Solution | Prevent Overheating and Damage, View NowOperating Conditions in National Standard GB 6450-1986Ambient temperature: Maximum ambient temperature: +40°C Daily average maximum temperature: +30°C Annual average maximum temperature: +20°C Minimum temperature: -30°C (outdoor); -5°C (indoor) Horizontal axis: Product load; Vertical axis: Average coil temperature rise in Kelvin (note: not in Celsius).For Class H insulation products, the long-term temperature resistance of insulation materials is stipulated by the state as 180°C. However, the inRockwell09/12/2025 -
High harmonics? Your transformer may be overheating and aging fast.This report is based on the analysis of one-day power quality monitoring data of your company's distribution system. The data shows that there is significant three-phase current harmonic distortion in the system (with a high total harmonic distortion of current, THDi). In accordance with international standards (IEC/IEEE), harmonic currents at this level have posed substantial risks to the safe, reliable, and economical operation of the power supply transformer, mainly manifested in additional hLeon09/12/2025 -
Ultimate Guide to AC Contactor Abnormal Noise: From Electromagnetic Noise to Mechanical Vibration, Accurate Diagnosis and HandlingIn electrical control systems, AC contactors are among the commonly used electrical components, and they are also a common source of various electrical faults. After long-term use—especially in harsh environments with high levels of dust—AC contactors may sometimes emit squeaking or rattling noises after being pulled in and held. The causes of this phenomenon are analyzed as follows.Squeaking Noise After Pull-In and HoldingA fully functional AC contactor makes no noise when energized and pulledFelix Spark09/11/2025
-
Distribution automation systems solutionsWhat are the difficulties in overhead line operation and maintenance?Difficulty one:Overhead lines of distribution network have wide coverage,complicatedterrain,many radiation branches and distributed power supply,resultingin "many line faults and difficulty in fault troubleshooting".Difficulty Two:Manual troubleshooting is time-consuming and laborious.Meanwhile,therunning current,voltage and switching state of the line cannot be graspedin real time,because of the lack of intelligent technical mRW Energy04/22/2025 -
Interference Generated by Frequency Converters and SolutionsA frequency converter is a device used to adjust the speed and voltage of an electric motor by changing the motor's supply frequency to achieve speed control. However, during operation, frequency converters generate some interference that can negatively impact other electronic equipment and the power grid. Therefore, it's necessary to adopt solutions to mitigate this interference.Electromagnetic Interference (EMI): When adjusting the motor's supply frequency, frequency converters generate higRW Energy08/21/2025 -
Common Inverter Faults and SolutionsOvercurrent FaultOvercurrent is one of the most frequent faults encountered during inverter operation. To better protect the inverter, multi-level protection against overcurrent is generally implemented. Based on the severity of the overcurrent, it can be categorized into the following situations: power module overcurrent, hardware overcurrent, and software overcurrent. Typically, power module overcurrent is the highest-level fault. The hardware overcurrent threshold is significantly lower thanRW Energy08/21/2025
